
Ozone Test Chamber Suppliers in India – Things to Look Out For
Ozone rarely causes complete degradation of rubber, however it does cause fine cracking in the material. This will often only become visible once a product has been in use for months. Products such as hoses or seals may pass dimensional inspections upon dispatch, however will begin to visibly crack around areas such as motors, outdoors or busy roadsides. Whilst there is only a small amount of ozone in the atmosphere, it is enough to affect stretched rubber. Ozone resistance testing helps manufacturers of tyres, cables, seals, gaskets and automotive components to see how their product will hold up before sending to their customer.
What is an Ozone Test Chamber?
An ozone test chamber will expose samples to a measured amount of ozone at a measured temperature. This will replicate the effects of ozone in the environment in a short amount of time. The ozone is generated within the chamber, typically using a high voltage or silent discharge generator. The ozone concentration will be monitored continuously using an analyser. There will be a constant temperature throughout and airflow.
An Ozone Aging Test Chamber is used to assess how a sample of rubber or elastomer reacts. The sample will be placed under a set strain and inspected for cracking at set time points. This gives an accurate and repeatable result showing how resistant the material is to ozone.
Why is Ozone Resistance Testing Required?
Ozone attacks double bonded molecules found in unsaturated rubbers such as natural rubber, SBR, polybutadiene or nitrile rubber. When under tension the material will begin to crack perpendicular to the stress applied. These cracks are initially very small however increase in size and can cause failure in sealing lips, sidewalls or cable sheaths.
This causes issues such as leaking seals, warranty claims, reduced lifespan and in some cases safety issues. Using an ozone test chamber will also help you compare different compounds. If you are looking to compare packages of antiozonants or are using a new rubber blend, an ozone cracking test will provide you with data.
What Industries Will Need Ozone Testing Equipment?
Typically the demand will come from industries that use rubber or polymer parts under tension, bending or in open environments.
- Rubber product/compound manufacturer
- Automotive components – belts, boots, bushings, weather seals
- Tyre manufacture
- Insulation and sheathing of cables and wires
- Hoses, seals, o-rings and gaskets
- Polymer/plastic manufacturer
- Testing, quality control and independent testing laboratories.
A tyre plant may want to test compounds in their tyre sidewalls. Cable manufacturers will want to test sheathing under bending. Whilst the material will be different you will want to know how long it will last.
Things to Consider When Looking at Ozone Test Chamber Suppliers in India
Not all test chambers will be suitable for your laboratory. Below are some key factors to look out for when choosing.
Ozone Concentration Control
How is the concentration monitored? Does the chamber automatically adjust to maintain the correct concentration? If the concentration isn’t constant during the test then the results won’t mean much. Make sure you can see the actual and set values.
Temperature Control
Many rubber tests are performed at a constant, slightly increased temperature. Ensure there is an appropriate control loop and sensor. How is the temperature evenly distributed throughout the chamber?
Static/Dynamic Testing
Static testing means the sample will be held under a constant strain. Dynamic means the sample will be moved back and forth. This will replicate parts such as belts, boots or hoses that have movement in them. If your products have movement consider using a test chamber that can accommodate both fixturing types.
Standards
Ensure the equipment can be set up to test according to the standards your customers require. For rubber testing the most common standards are ASTM D1149, ISO 1431 and some markets will use JIS K6259.
Construction, Controls and Safety
A stainless steel chamber will provide a better resistance to ozone than many other options. An airtight chamber will ensure the test conditions remain consistent. A digital or PLC control system will make setup and repeat testing easier. As ozone can be dangerous ensure there is appropriate venting or neutralising, overheat and electrical protection.
Size, Customisation & Support
Ensure the chamber is the correct size for the number of samples you will be testing. A company offering a custom setup and technical support will save you a lot of hassle. Often with ozone test chamber manufacturers the after sales support can be just as important as the machine itself.
Why Choose 4B Testing Equipments Pvt. Ltd.?
4B Testing Equipments Pvt. Ltd. are based in Faridabad, Haryana and are a manufacturer of industrial and laboratory testing equipment. They have a wide range including rubber, plastics, paper and packaging, coating and environmental chambers. Within their rubber testing range they offer ozone ageing, resistance and cracking test chambers.
Their Ozone ageing test chamber with HMI touchscreen has a PLC control system. As stated on their product page “The test chamber provides automated control and monitoring of ozone concentration, temperature and test duration. The ozone ageing test chamber can be supplied with static/dynamic sample holders. The HMI allows easy setup with the ability to monitor samples in real time, alarms and data recording. The internal chamber is made from stainless steel. Overheat and electrical protection are provided. The chamber can be set up to test according to various standards including ASTM D1149 and ISO 1431. The chamber can be supplied in a variety of sizes.”
As a Quality Control Manager this allows you to easily repeat testing. By controlling the ozone concentration, temperature and time you can compare results between batches or compare a new compound with an existing one. This can help with supplier approvals and customer audits.
As each laboratory will have different demands, ensure you contact the company to find out exactly what specifications, ranges and set up they can provide.
Conclusion
Once you know what you need the test chamber for it will be easier to choose the right supplier. Think about what materials you are testing, what standards your customers are using, if your products have movement and how many samples you are testing. Once you have this information you can compare the suppliers. A good fit for your ozone resistance testing will pay for itself by reducing failures in the field and giving confidence in your material choices.
If you are looking to purchase ozone testing equipment contact 4B Testing Equipments Pvt. Ltd. for more information on their products, technical support and quotations. Visit 4bequipments.com or call +91 9811129236. Email info@4bequipments.com.


